Note: Check the Category Tree on the left for possible Sub Categories that may help narrow your search.

09.8 g DIGITAL Micro Helicopter Tail Control BMS-376DDG
	Quantity in Basket: none Code: BMS-376DDG Price:$22.95 In Stock
	Quantity:
BMS-376DDG Digital Micro Servo For Helicopter Tail Control   The BMS-376DD is designed exclusively for helicopter tail rotor control. The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over 120° C without degradation. Weight 9.8 Grams / 0.41 oz (with wire) Size 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 in. Torque At 4.8v 21 oz.in. Speed At 4.8v 0.11 sec / 60° Torque At 6.0v 26 oz.in. Speed At 6.0v 0.09 sec / 60° Ball Bearing Yes Metal Gears No Features: Carbon+30% POM gears with smooth curvature M9.6 ball bearing (si-oil) High-torque motor with low RF noise (CE certified) Rubber seals for waterproof case Designed for helicopter tail rotor control Futaba compatible 25 tooth output splines Digital motor drive with ultra-square PWM signal Automatic determination of servo center pulse width Fail-Safe function 2PEW coated motor wire for high-temperature use Digital control IC - SOP package with 12bit data transfer MOS-FET motor driver chips that can handle 7A peak loads Useable on 6.0V This servo comes with a servo accessory package. This servo comes with JR/Hitec S Connector also known as a "Universal Connector". Note: Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers. Follow the wiring diagram below. If you hook this up incorrectly nothing bad will happen to the servo. Just flip the S connector and around and the servo will work correctly.   "S" Type Connector    Futaba "J" Connector    Wire Info  Brown Wire Black Wire   Battery Negative  Red Wire Red Wire   Battery Positive  Orange Wire White Wire Signal WARNING: Using the servo arm to turn the servo motor may cause the gears to break or jump and the servo will stop functioning correctly. This is true for all servos regardless of servo manufacturer. SlickZERO assumes no responsibility for this kind of damage. This can also occur as a result of crash damage or hard landing. Surface vehicles should use a quality "Servo-saver" if the manufacturer did not incorporate one in the design.

Related Item(s)

Code Name Image Price Availability   20322 20322 Outside Case BMS-375DD, 375DMG, 376DDG   $2.95 In Stock