Note: Check the Category Tree on the left for possible Sub Categories that may help narrow your search.

Titanium SuperBoom "300" type Heli 12" (305 mm)
	Quantity in Basket: none Code: SB305 Price:$13.95 In Stock
	Quantity:
NOTE: If your heli normally would use the 12"boom but you are using light weight skids, Aluminum tail parts or dual tail motors, or is "just tail heavy", then use the shorter 10 1/2" boom. SuperBoom is a Titanium alloy tail boom. It's the same Ti alloy commonly used in aerospace engineering. SuperBoom has a nice, polished finish and engraved SuperSkids logo. Adding the power of Titanium to your micro heli will do more than just make it look good. Ti won't crack and splinter like the stock carbon fiber tail boom, and it's stronger and less apt to bend than aluminum. If you do manage to bend it, the bends are generally more gradual and easier to straighten. The SuperBoom is available in 2 models. SB267 is 10 1/2" long (4.95 mm x 267 mm) and generally used on Fixed Pitch (FP) helis like the Dynam Hughes 300, EF Sabre, Walkera DF4 and helis of similar design. SB305 is 12" long (4.95 mm x 305 mm) and generally used for E-flite, Esky (FP and CP2) and similar CP helis. Note: On most helis, SuperBooms are designed to be glued in place with CA or epoxy in the same manner as the stock tail boom. The longer SB305 boom used with SuperSkids Landing Gear and some light batteries may make it harder to get a good fore/aft balance, especially when used with aftermarket tail housing assemblies. If you need to trim (shorten) the boom for better weight distribution, be careful not to make it so short that you have main and tail rotor collisions. Trimming the boom in these cases is the customer's responsibility. SuperBooms are a stand-alone product designed to work on stock helicopters. Installation: On some helicopters, the boom is secured to the frame and tail housing with set screws. On others, it's glued in with CA glue. We recommend securing your SuperBoom in the same manner that the stock tail boom was secured (screws or CA). The set screw installation is easy. If your boom was secured with CA, you may be able to remove it by using a liquid CA debonder (made by several companies). If the debonder is not effective, you can use a new frame and tail housing.

Related Item(s)

Code Name Image Price Availability   SB267 Titanium SuperBoom "300" type Heli 10 1/2" (267 mm)   $13.95 In Stock