Note: Check the Category Tree on the left for possible Sub Categories that may help narrow your search.

ESC 10 A Brushless 2-3 Li-Poly - 10A-A-BP
	Quantity in Basket: none Code: 10A-A-BP Price:$16.95 In Stock
	Quantity:
10A Mk II Brushless ESC Weight: 8.5 grams / 0.3 oz. Size: 36 x 18 x 9 mm / 1.42 x 0.71 x 0.35 in. Constant Current: 10A Max Current: 15A / 10 Sec. FET: 6 BEC: 1A TIMING: Auto PWM: Auto Input: 2-3 cell Li-Poly Low-Voltage Cutoff: Auto - 3.0V / cell Li-Poly Features: Auto-detects 2 or 3 cell Li-Poly pack and adjusts cut-off voltage Beeps number of cells at startup Auto-learns throttle range Auto-timing Safe start 1A BEC - supports 3 servos Flexible silicone wire Special Instructions: Never exceed the recommended battery voltage listed on the package. Do not use a separate battery supply with this controller. Never disconnect the battery supply when the motor is running. We strongly suggest that you use an overload fuse in the battery circuit. For example, a motor will run at 8 amps therefore a 10 amp speed controller is adequate. If the motor is stalled or stopped, with the power on, then it will draw 20 to 25 amps and burn out the speed controller. An overload fuse can prevent this type of damage. Also, the BEC provides a regulated power supply to the receiver. Usually about 1amp. A stalled servo can draw 2 or 3 amps and damage the BEC which in turn can cause damage to the receiver. NOTE: SlickZERO Hobby Products assumes no responsibility for the improper use and installation of this product.